Effect of Forming and Heat Treatment Parameters on the Mechanical Properties of Medium Manganese Steel with 5% Mn
dc.contributor.author | Leták, Radek | |
dc.contributor.author | Jirková, Hana | |
dc.contributor.author | Kučerová, Ludmila | |
dc.contributor.author | Jeníček, Štěpán | |
dc.contributor.author | Volák, Josef | |
dc.date.accessioned | 2023-10-30T11:00:19Z | |
dc.date.available | 2023-10-30T11:00:19Z | |
dc.date.issued | 2023 | |
dc.description.abstract | Středně manganové oceli patří do kategorie moderních vysoko-pevných ocelí třetí generace. Díky svému legování využívají k dosažení svých mechanických vlastností řadu zpevňujících mechanismů. Tyto mechanismy jsou efekty TRIP a TWIP. Díky vynikající kombinaci pevnosti a tažnosti jsou vhodné i pro bezpečnostní součásti karoserií automobilů, jako jsou boční výztuhy. Pro experimentální program byla použita střední manganová ocel s 0,2 % C, 5 % Mn a 3 % Al. Plechy o tloušťce 1,8 mm bez povrchové úpravy byly tvarovány v lisovacím kalicím nástroji. Boční výztuhy vyžadují v různých částech různé mechanické vlastnosti. Na vyrobených profilech byla testována změna mechanických vlastností. Změny ve zkoušených oblastech byly vyvolány lokálním ohřevem do mezikritické oblasti. Tyto výsledky byly porovnány s klasicky žíhanými vzorky v peci. V případě nástrojového kalení byly mezní hodnoty pevnosti vyšší než 1450 MPa s tažností přibližně 15 %. | cs |
dc.description.abstract-translated | Medium manganese steels fall into the category of modern third-generation high-strength steels. Thanks to their alloying, they use a number of strengthening mechanisms, such as the TRIP and TWIP effects, to achieve their mechanical properties. The excellent combination of strength and ductility also makes them suitable for safety components in car shells, such as side reinforcements. Medium manganese steel with 0.2% C, 5% Mn, and 3% Al was used for the experimental program. Sheets with a thickness of 1.8 mm without surface treatment were formed in a press hardening tool. Side reinforcements require various mechanical properties in different parts. The change in mechanical properties was tested on the produced profiles. The changes in the tested regions were produced by local heating to an intercritical region. These results were compared with classically annealed specimens in a furnace. In the case of tool hardening, strength limits were over 1450 MPa with a ductility of about 15%. | en |
dc.format | ||
dc.format | 18 s. | cs |
dc.format.mimetype | application/pdf | |
dc.identifier.citation | LETÁK, R. JIRKOVÁ, H. KUČEROVÁ, L. JENÍČEK, Š. VOLÁK, J. Effect of Forming and Heat Treatment Parameters on the Mechanical Properties of Medium Manganese Steel with 5% Mn. Materials, 2023, roč. 16, č. 12, s. nestránkováno. ISSN: 1996-1944 | cs |
dc.identifier.document-number | 1017215700001 | |
dc.identifier.doi | 10.3390/ma16124340 | |
dc.identifier.issn | 1996-1944 | |
dc.identifier.obd | 43939855 | |
dc.identifier.uri | 2-s2.0-85163754373 | |
dc.identifier.uri | http://hdl.handle.net/11025/54564 | |
dc.language.iso | ||
dc.language.iso | en | en |
dc.project.ID | SGS-2021-025/Aplikace elektronového paprsku pro svařování moderních vysocepevných ocelí | cs |
dc.project.ID | SGS-2022-012/Výzkum a vývoj moderních kovových materiálů | cs |
dc.publisher | MDPI | en |
dc.relation.ispartofseries | Materials | en |
dc.rights | © The Author(s) | en |
dc.rights.access | openAccess | en |
dc.subject | press-hardening | cs |
dc.subject | středně manganové ocele | cs |
dc.subject | indukční ohřev | cs |
dc.subject | omega profily | cs |
dc.subject.translated | medium manganese steels | en |
dc.subject.translated | press hardening | en |
dc.subject.translated | induction heating | en |
dc.subject.translated | omega profiles | en |
dc.title | Effect of Forming and Heat Treatment Parameters on the Mechanical Properties of Medium Manganese Steel with 5% Mn | en |
dc.title.alternative | Vliv parametrů tváření a tepelného zpracování na mechanické vlastnosti středně manganové oceli s 5 % Mn | cs |
dc.type | článek | cs |
dc.type | article | en |
dc.type.status | ||
dc.type.status | Peer-reviewed | en |
dc.type.version | publishedVersion | en |
Files
Original bundle
1 - 1 out of 1 results
No Thumbnail Available
- Name:
- materials-16-04340-v2.pdf
- Size:
- 16.01 MB
- Format:
- Adobe Portable Document Format