Removable Mounting of the Rolling Machines’ Working Rolls
| dc.contributor.author | Hlaváč, Jan | |
| dc.contributor.author | Volejníček, Martin | |
| dc.contributor.author | Gavenda, Petr | |
| dc.contributor.author | Vydržel, David | |
| dc.contributor.author | Glatz, Karel | |
| dc.contributor.author | Dekastello, Jiří | |
| dc.date.accessioned | 2021-12-13T11:00:17Z | |
| dc.date.available | 2021-12-13T11:00:17Z | |
| dc.date.issued | 2021 | |
| dc.description.abstract | Práce je zaměřena na konstrukční řešení způsobu vyjímání pracovních válců z válcovací stolice pro příčně klínové válcování. K válcům jsou upnuty nástroje. V případě změny technologie je nutné nástroje vyměnit. Vyměnit nástroje lze provést přímo na stroji, jedná se o neproduktivní čas. Dalším způsobem výměny nástrojů je výměna celých válců. Průměr válců je veliký, proto nelze samotné válce vytáhnout bočním otvorem, tak jako je tomu u válcovací stolice. Existuje několik způsobů, jak spojit střední část válců s čepy umístěnými ve stojinách. V práci jsou porovnány spojení s víkem a čepem čtyřhranným nebo válcovým a varianty v jednostranně výsuvným čepem s kuželovou nebo kulovou plochou. Cíle práce je provést porovnání tuhostí způsobů spojení. | cs |
| dc.description.abstract-translated | The work is focused on the design solution of the method of removing the work rolls from the rolling mill for transverse wedge rolling. The tools are clamped to the cylinders. In case of technology change, the tools must be replaced. Tools can be changed directly on the machine, this is a non-productive time. Another way to change tools is to replace entire cylinders. The diameter of the rollers is large, so the rollers themselves cannot be pulled out through the side hole, as is the case with a rolling mill. There are several ways to connect the middle part of the cylinders to the pins located in the stands. The work compares connections with a lid and a square or cylindrical shaft and variants in a single-sided extension able shaft with a conical or spherical surface. The aim of the work is to compare the stiffness of connection methods. | en |
| dc.format | 6 s. | cs |
| dc.format.mimetype | application/pdf | |
| dc.identifier.citation | HLAVÁČ, J. VOLEJNÍČEK, M. GAVENDA, P. VYDRŽEL, D. GLATZ, K. DEKASTELLO, J. Removable Mounting of the Rolling Machines’ Working Rolls. MM Science Journal, 2021, roč. 2021, č. March, s. 4310-4315. ISSN: 1803-1269 | cs |
| dc.identifier.document-number | 634572700012 | |
| dc.identifier.doi | 10.17973/MMSJ.2021_03_2021002 | |
| dc.identifier.issn | 1803-1269 | |
| dc.identifier.obd | 43931290 | |
| dc.identifier.uri | 2-s2.0-85102778706 | |
| dc.identifier.uri | http://hdl.handle.net/11025/46306 | |
| dc.language.iso | en | en |
| dc.project.ID | SGS-2019-001/Komplexní podpora konstruování technických zařízení IV. | cs |
| dc.publisher | MM publishing | en |
| dc.relation.ispartofseries | MM Science Journal | en |
| dc.rights.access | openAccess | en |
| dc.subject | válcovací stroj | cs |
| dc.subject | příčné klínové válcování | cs |
| dc.subject | CAE | cs |
| dc.subject | připojení hřídele | cs |
| dc.subject | tuhost | cs |
| dc.subject.translated | rolling machine | en |
| dc.subject.translated | cross-wedge rolling | en |
| dc.subject.translated | CAE | en |
| dc.subject.translated | shaft connection | en |
| dc.subject.translated | stiffness | en |
| dc.title | Removable Mounting of the Rolling Machines’ Working Rolls | en |
| dc.title.alternative | Odnímatelná montáž pracovních válců válcovacích strojů | cs |
| dc.type | článek | cs |
| dc.type | article | en |
| dc.type.status | Peer-reviewed | en |
| dc.type.version | publishedVersion | en |