Effects of Heat Treatment on Additively Manufactured 316L Stainless Steel

Show simple item record
dc.contributor.authorBurdová, Karolína
dc.contributor.authorJirková, Hana
dc.contributor.authorKučerová, Ludmila
dc.contributor.authorZetková, Ivana
dc.contributor.authorMach, Josef
dc.date.accessioned2024-01-15T11:00:22Z
dc.date.available2024-01-15T11:00:22Z
dc.date.issued2022
dc.description.abstractThe microstructure and mechanical properties of selectively laser melting (SLM)-manufactured 316L stainless steele were evaluated by scanning electron microscopy, tensile testing at ambient temperature and Charpy impact test. These samples were compared with as-built samples. Following heat treatment conditions were used: 500 °C for 2/4 hours, 650 °C for 2 hours and 900 °C for 1 hour. Cooling took place in furnace and in furnace with opened valve. Compared to as built samples the heat treatment at lower temperature negatively influenced elongation but increased the amount of energy absorbed by material during fracture.en
dc.formatp.6
dc.identifier.citationBURDOVÁ, K.; JIRKOVÁ, H.; KUČEROVÁ, L.; ZETKOVÁ, I.; MACH, J. Effects of Heat Treatment on Additively Manufactured 316L Stainless Steel. Manufacturing Technology, 2022, roč. 22, č. 3, s. 261-266. ISSN 1213-2489.
dc.identifier.document-number859956800001
dc.identifier.doi10.21062/mft.2022.042
dc.identifier.issn1213-2489
dc.identifier.obd43941248
dc.identifier.urihttp://hdl.handle.net/11025/55106
dc.identifier.uri2-s2.0-85133778692
dc.language.isoen
dc.project.IDEF18_069/0010040/Výzkum aditivních technologií pro budoucí uplatnění ve strojírenské praxi - RTI plus
dc.relation.ispartofManufacturing Technology
dc.subject.translatedadditive manufacturingen
dc.subject.translatedheat treatmenten
dc.subject.translatedstainless steelen
dc.subject.translated316Len
dc.titleEffects of Heat Treatment on Additively Manufactured 316L Stainless Steelen
dc.typečlánekcs
dc.typearticleen
dc.type.statusPeer-reviewed

Files

Collections

OBD