Integration of Press-Hardening Technology into Processing of Advanced High Strength Steels

dc.contributor.authorJirková, Hana
dc.contributor.authorOpatová, Kateřina
dc.contributor.authorKáňa, Josef
dc.contributor.authorBublíková, Dagmar
dc.contributor.authorBystrianský, Martin
dc.date.accessioned2019-07-01T10:00:10Z
dc.date.available2019-07-01T10:00:10Z
dc.date.issued2018
dc.description.abstract-translatedDevelopment of high strength or even ultra-high strength steels is mainly driven by the automotive industry which strives to reduce the weight of individual parts, fuel consumption, and CO2 emissions. Another important factor is the passenger safety which will improve by the use of these materials. In order to achieve the required mechanical properties, it is necessary to use suitable heat treatment in addition to an appropriate alloying strategy. The main problem of these treatments is the isothermal holding time. These holding times are technologically demanding which is why industry seeks new possibilities to integrate new processing methods directly into the production process. One option for making high-strength sheet metals is press-hardening which delivers high dimensional accuracy and a small spring-back effect. In order to test the use of AHSS steels for this technology, a material-technological modelling was chosen. Material-technological models based on data obtained directly from a real press-hardening process were examined on two experimental steels, CMnSi TRIP and 42SiCr. Variants with isothermal holding and continuous cooling profiles were tested. It was found that by integrating the Q&P process (quenching and partitioning) into press hardening, the 42SiCr steel can develop strengths of over 1800 MPa with a total elongation of about 10%. The CMnSi TRIP steel with lower carbon content and without chromium achieved a tensile strength of 1160 MPa with a total elongation of 10%.en
dc.format6 s.cs
dc.format.mimetypeapplication/pdf
dc.identifier.citationJIRKOVÁ, H., OPATOVÁ, K., KÁŇA, , BUBLÍKOVÁ, D., BYSTRIANSKÝ, M. Integration of Press-Hardening Technology into Processing of Advanced High Strength Steels. In: Materials Science Forum. Curych: Trans Tech Publications Ltd, 2018. s. 317-322. ISBN 978-3-0357-1208-7, ISSN 0255-5476.en
dc.identifier.doi10.4028/www.scientific.net/MSF.941.317
dc.identifier.isbn978-3-0357-1208-7
dc.identifier.issn0255-5476
dc.identifier.obd43924414
dc.identifier.uri2-s2.0-85064076276
dc.identifier.urihttp://hdl.handle.net/11025/34832
dc.language.isoenen
dc.project.IDLO1502/RoRTI - Rozvoj Regionálního technologického institutucs
dc.publisherTrans Tech Publications Ltden
dc.relation.ispartofseriesMaterials Science Forumen
dc.rights© Trans TECH Publications LTDen
dc.rights.accessopenAccessen
dc.subject.translatedHigh Strength Steelen
dc.subject.translatedPress-hardeningen
dc.subject.translatedTRIP Steelen
dc.subject.translatedQ&P Processen
dc.titleIntegration of Press-Hardening Technology into Processing of Advanced High Strength Steelsen
dc.typekonferenční příspěvekcs
dc.typeconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen

Files

OPEN License Selector