Preventing flash occurrence in the injection plastic mould
dc.contributor.author | Habrman, Martin | |
dc.contributor.author | Chval, Zdeněk | |
dc.contributor.author | Ráž, Karel | |
dc.contributor.author | Streit, Philipp | |
dc.contributor.author | Stümpfl, Dominik | |
dc.date.accessioned | 2023-02-20T11:00:31Z | |
dc.date.available | 2023-02-20T11:00:31Z | |
dc.date.issued | 2022 | |
dc.description.abstract | Tento článek se zabývá vstřikováním do plastové formy. Jedná se o netradiční přístup ke vstřikování zejména proto, že k výrobě formy je použit 3D tisk. Pro srovnání byla forma stejného tvaru vyrobena z běžného materiálu (hliníku). Vlastnosti plastové formy pak byly porovnány s hliníkovou formou. Jako hlavní nedostatek se ukázala tvorba přetoků. Úprava formy byla navržena ve dvou variantách, z nichž jedna byla realizována. Výhoda řešení zabránění tvorby přetokům byla popsána. Nakonec byly na základě provedených zkoušek shrnuty další možnosti řešení | cs |
dc.description.abstract-translated | This article deals with the injection moulding into the plastic mould. This is an unconventional approach to injection moulding, especially because the 3D printing is used to produce the mould. The mould with the same shape was made of a conventional material (aluminium) for comparison. The properties of the plastic mould were then compared to the aluminium mould. The flash was seen as the main shortcoming. The modifications of the mould were suggested in two variants, one of them was implemented. The advantage of the flash solution was described. Finally, other solution options were summarized based on the performed testing. | en |
dc.format | 4 s. | cs |
dc.format.mimetype | application/pdf | |
dc.identifier.citation | HABRMAN, M. CHVAL, Z. RÁŽ, K. STREIT, P. STÜMPFL, D. Preventing flash occurrence in the injection plastic mould. MM Science Journal, 2022, roč. 2022, č. October 2022, s. 5854-5857. ISSN: 1803-1269 | cs |
dc.identifier.document-number | 857420000001 | |
dc.identifier.doi | 10.17973/MMSJ.2022_10_2022096 | |
dc.identifier.issn | 1803-1269 | |
dc.identifier.obd | 43939044 | |
dc.identifier.uri | 2-s2.0-85139172188 | |
dc.identifier.uri | http://hdl.handle.net/11025/51582 | |
dc.language.iso | en | en |
dc.project.ID | EF18_069/0010040/Výzkum aditivních technologií pro budoucí uplatnění ve strojírenské praxi - RTI plus | cs |
dc.publisher | MM publishing Ltd. | en |
dc.relation.ispartofseries | MM Science Journal | en |
dc.rights | © MM publishing Ltd. | en |
dc.rights.access | openAccess | en |
dc.subject | Vstřikování | cs |
dc.subject | Hliníková forma | cs |
dc.subject | 3D tištěná plastová forma | cs |
dc.subject | Přetok | cs |
dc.subject.translated | Injection moulding | en |
dc.subject.translated | Aluminium mould | en |
dc.subject.translated | 3D printed plastic mould | en |
dc.subject.translated | Flash | en |
dc.title | Preventing flash occurrence in the injection plastic mould | en |
dc.title.alternative | Bránění tvorby přetoků při vstřikování do plastové formy | cs |
dc.type | článek | cs |
dc.type | article | en |
dc.type.status | Peer-reviewed | en |
dc.type.version | publishedVersion | en |
Files
Original bundle
1 - 1 out of 1 results
No Thumbnail Available
- Name:
- mmscience_2022-09_preventing-flash-occurrence-in-the-injection-plastic-mould.pdf
- Size:
- 1.09 MB
- Format:
- Adobe Portable Document Format