Design of Injection Mold from Plastic Material
dc.contributor.author | Chval, Zdeněk | |
dc.contributor.author | Ráž, Karel | |
dc.contributor.author | Sedláček, František | |
dc.date.accessioned | 2021-03-15T11:00:34Z | |
dc.date.available | 2021-03-15T11:00:34Z | |
dc.date.issued | 2020 | |
dc.description.abstract | Tento článek se zabývá použitím plastů pro výrobu vstřikovacích forem. Časy výroby forem byly snížené o 90% a snížení nákladů bylo až o 75%. To jsou některé z výhod prototypových forem z plastových materiálů. Dnes se pro plastové formy používají materiály s teplotami tavení nad 300 ° C. Zahrnují ABS, PE, PP a PA. V této studii bylo provedeno testování vysokoteplotní pryskyřice od společnosti Formlabs. Data z tlakové a tahové zkoušky jsou porovnávána s hodnotami datového listu a s virtuálními simulacemi. Testy byly prováděny při různých teplotách. Na základě jejich výsledků lze identifikovat vhodný proces formování pomocí forem z tohoto materiálu. | cs |
dc.description.abstract-translated | This paper deals with the use of plastics for making injection molds. Mold production times reduced by 90% and costs cut by up to 75% are some of the benefits of prototype molds from plastic materials. Today, materials with melt temperatures above 300 °C are used for plastic molds. They include ABS, PE, PP and PA. In this study, testing of high-temperature resin from Formlabs was performed. Compression and tensile test data are compared with the datasheet values and with virtual simulations. The tests were carried out at different temperatures. Based on their results, one can identify a suitable molding process with molds from this material. | en |
dc.format | 6 s. | cs |
dc.format.mimetype | application/pdf | |
dc.identifier.citation | CHVAL, Z. RÁŽ, K. SEDLÁČEK, F.Design of Injection Mold from Plastic Material. In: Key Engineering Materials. [S. l.]: Trans tech Publication, 2020. s. 75-80. ISBN 978-3-0357-1619-1, ISSN 1013-9826. | cs |
dc.identifier.doi | 10.4028/www.scientific.net/KEM.847.75 | |
dc.identifier.isbn | 978-3-0357-1619-1 | |
dc.identifier.issn | 1013-9826 | |
dc.identifier.obd | 43932264 | |
dc.identifier.uri | 2-s2.0-85088209968 | |
dc.identifier.uri | http://hdl.handle.net/11025/42981 | |
dc.language.iso | en | en |
dc.project.ID | EF18_069/0010040/Výzkum aditivních technologií pro budoucí uplatnění ve strojírenské praxi - RTI plus | cs |
dc.publisher | Trans tech Publication | en |
dc.relation.ispartofseries | Key Engineering Materials | en |
dc.rights | Plný text je přístupný v rámci univerzity přihlášeným uživatelům. | cs |
dc.rights | © Trans Tech Publication | en |
dc.rights.access | restrictedAccess | en |
dc.subject | Aditivní technologie | cs |
dc.subject | vstřikovací forma | cs |
dc.subject | mechanické vlastnosti | cs |
dc.subject | plastový materiál | cs |
dc.subject.translated | Additive technology | en |
dc.subject.translated | Injection mold | en |
dc.subject.translated | Mechanical properties | en |
dc.subject.translated | Plastic material | en |
dc.title | Design of Injection Mold from Plastic Material | en |
dc.title.alternative | Návrh vstřikovací formy z plastového materiálu | cs |
dc.type | postprint | cs |
dc.type | postprint | en |
dc.type.status | Peer-reviewed | en |
dc.type.version | acceptedVersion | en |