Effect of Cryogenic Treatment on Properties of Cemented Carbides

dc.contributor.authorPrůcha, Vojtěch
dc.contributor.authorBricín, David
dc.contributor.authorKříž, Antonín
dc.date.accessioned2019-09-09T10:00:11Z
dc.date.available2019-09-09T10:00:11Z
dc.date.issued2019
dc.description.abstractHlavním cílem výzkumného programu je představit experimenty zkoumající vliv kryogenního zpracování na vlastnosti slinutých karbidů. Experimentální materiály byly vybrány ze tří základních skupin slinutých karbidů s různými pojivy a rozdílnou velikostí zrna WC. Jedna polovina experimentálních vzorků byla kryogenně zpracována, zatímco druhá polovina vzorků byla v původním tepelně nezpracovaném stavu. Následně byly vzorky broušeny a leštěny běžnými metalografickými postupy. Vliv kryogenního zpracování na vlastnosti slinutých karbidů byl analyzován vyhodnocením mikrostruktury vzorků na světelném optickém a řádkovacím elektronovém mikroskopu. Dále byla provedena analýza fázového složení pomocí rentgenové difrakce, měření tvrdosti dle Vickerse a lomové houževnatosti KIC. Bylo zjištěno, že zbytková napětí v oblasti povrchu vzorků se po kryogenním zpracování snížila. Zvýšila se lomová houževnatost vzorků KIC.cs
dc.description.abstract-translatedThe main goal of this paper is to present experiments exploring the effect of cryogenic treatment on the properties of cemented carbides. The experimental materials were chosen from three basic groups of cemented carbides with different binders and different WC grain sizes. One half of the specimens were cryogenically-treated, whereas the other half were in the as-received condition. The specimens were ground and polished using metallographic procedures. Effects of cryogenic treatment were studied by metallographic observation using light and scanning electron microscopes, by X-ray analysis of phase composition and by measuring Vickers hardness and KIC fracture toughness. It was found that residual stresses in specimen surface decreased after cryogenic treatment. The KIC fracture toughness of the specimens increased.en
dc.format6 s.cs
dc.format.mimetypeapplication/pdf
dc.identifier.citationMENŠÍK, L., VIK, R., PRETL, S., BĚLOHOUBEK, J., SYROVÝ, T., SYROVÁ, L., KUBÁČ, L., MENŠÍK, L. Možnosti uplatnění internetu věcí (IoT) v precizním zemědělství v ČR. Úroda, 2019, č. 12/2019, s. 341-350. ISSN 0139-6013.en
dc.identifier.doi10.21062/ujep/256.2019/a/1213-2489/MT/19/1/129
dc.identifier.issn1213-2489
dc.identifier.obd43926126
dc.identifier.uri2-s2.0-85063349309
dc.identifier.urihttp://hdl.handle.net/11025/34946
dc.language.isoenen
dc.project.IDSGS-2016-036/Analýza, vývoj a modifikace strojírenské technologie v oblasti objemového zpracování moderních materiálů , využívaných v oblasti energetických strojů, dopravních prostředků a souvisejících strojírenských aplikací.cs
dc.publisherJ. E. Purkyne University in Usti nad Labemen
dc.rightsPlný text není přístupný.cs
dc.rights© J. E. Purkyne University in Usti nad Labemen
dc.rights.accessclosedAccessen
dc.subjectKryogenní zpracovánícs
dc.subjectslinutý karbidcs
dc.subjectzbytková napětícs
dc.subjecttvrdostcs
dc.subjectfázová analýzacs
dc.subject.translatedCryogenic treatmenten
dc.subject.translatedcemented carbideen
dc.subject.translatedresidual stressen
dc.subject.translatedhardnessen
dc.subject.translatedphase analysisen
dc.titleEffect of Cryogenic Treatment on Properties of Cemented Carbidesen
dc.title.alternativeVliv kryogenního zpracování na vlastnosti slinutých karbidůcs
dc.typečlánekcs
dc.typearticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen

Files