Analysis of critical points in construction of piston in order to eliminate risks during application of the HCCI technology
dc.contributor.author | Puškár, Michal | |
dc.contributor.author | Puškár, Dušan | |
dc.contributor.editor | Čermák, Roman | |
dc.date.accessioned | 2019-09-16T04:55:15Z | |
dc.date.available | 2019-09-16T04:55:15Z | |
dc.date.issued | 2019 | |
dc.description.abstract-translated | Application of the HCCI technology was till now limited due to several principal problems, such as high compression ratios and excessive heat release. Both these factors are influencing local strength of the individual constructional parts concerning the piston combustion engine, whereby the most critical constructional part is the engine piston. A casted Vertex piston was analysed with the aim to find the areas where local stress and local strength are ciritical for the safety. The casting affects the properties of the used material which was a transeutectic silumin (aluminum-base casting alloy containing about 12 at % of silicon). The critical areas are the places in the structure where the relation "local stress/local strength" reaches the maximum value. Local strength of the investigated material was estimated using a material modell based on the relation between the strength and the mean distance between dendrite arms (secondary dendrite arms spacing = SDAS) in the casted microstructure. The differencies in the strength value can reach in the casted bulk mictrostructure, due to local heterogeneities, up to 15%. Using the FEM analysis, Fig. 1, the stress distribution in the piston was modelled and, on the other hand, based on SDAS measuring in the casted microstructures extracted from critical areas, the local strength values were calculated for various microstructures. Based on the relation "local stress/local strength" calculated for various localities the critical places were located in the piston, Fig. 2. | en |
dc.description.sponsorship | This work was supported by the Slovak Research and Development Agency under the contract No. APVV-16-0259. | en |
dc.format | 7 s. | cs |
dc.format.mimetype | application/PDF | |
dc.identifier.citation | 45. mezinárodní vědecká konference kateder dopravních, manipulačních, stavebních a zemědělských strojů, 10.-11.09.2019 Hotel Lions Plzeň: k příležitosti 70. výročí založení technického vysokého školství v Plzni: sborník příspěvků, p. 146-152. | cs |
dc.identifier.isbn | 978-80-261-0884-9 | |
dc.identifier.uri | http://hdl.handle.net/11025/34970 | |
dc.language.iso | en | en |
dc.publisher | Západočeská univerzita v Plzni | cs |
dc.rights | © Západočeská univerzita v Plzni | cs |
dc.rights.access | openAccess | en |
dc.subject | kritická místa | cs |
dc.subject | píst | cs |
dc.subject | místní síla | cs |
dc.subject | FEM | cs |
dc.subject.translated | critical places | en |
dc.subject.translated | piston | en |
dc.subject.translated | local strenght | en |
dc.subject.translated | FEM | en |
dc.title | Analysis of critical points in construction of piston in order to eliminate risks during application of the HCCI technology | en |
dc.title.alternative | Analýza kritických miest v konštrukcií piesta s cieľom eliminácie rizík pri aplikácii HCCI technológie | sk |
dc.type | konferenční příspěvek | cs |
dc.type | conferenceObject | en |
dc.type.status | Peer-reviewed | en |
dc.type.version | publishedVersion | en |
Files
Original bundle
1 - 1 out of 1 results
No Thumbnail Available
- Name:
- Puskar.pdf
- Size:
- 5.75 MB
- Format:
- Adobe Portable Document Format
- Description:
- Plný text
License bundle
1 - 1 out of 1 results
No Thumbnail Available
- Name:
- license.txt
- Size:
- 1.71 KB
- Format:
- Item-specific license agreed upon to submission
- Description: