Optimization of workability technological testing for open-die forging

Show simple item record
dc.contributor.authorKotous, Jakub
dc.contributor.authorKubec, Václav
dc.contributor.authorDuchek, Michal
dc.contributor.editorKučerová, Ludmila
dc.contributor.editorJirková, Hana
dc.contributor.editorJeníček, Štěpán
dc.date.accessioned2019-10-08T12:57:38Z
dc.date.available2019-10-08T12:57:38Z
dc.date.issued2019
dc.description.abstract-translatedThe valid technology design of open-die forging of alloys with poor workability always presents a challenge. A method of a fast designation of open-die forging conditions is described in this paper. The simplified forging test was considered to assess the limit states during the open-die forging. As such, it should be employed in industrial scale foundries. A V-shaped testing die was designed using the finite element (FEM) simulation. The V-shaped geometry is convenient in terms of strain evaluation. A rectangular steel block was tested in a wide range of working temperatures. Based on the test results the limit states can be designated. Thus, the risk of material failure can be avoided or minimized. Experimental test results further serves for the FEM simulation validation.en
dc.description.sponsorshipPING 2019 is organized with the support of funds for specific university research project SVK1-2019-002.en
dc.format1 s.cs
dc.format.mimetypeapplication/PDF
dc.identifier.citationJIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING 2019: modern trends in material engineering: 10.-13.09.2019, Pilsen. 1. vyd. Plzeň: University of West Bohemia, 2019, s. 90. ISBN 978-80-261-0879-5.en
dc.identifier.isbn978-80-261-0879-5
dc.identifier.urihttp://hdl.handle.net/11025/35261
dc.language.isoenen
dc.publisherUniversity of West Bohemiaen
dc.rights© University of West Bohemiaen
dc.rights.accessopenAccessen
dc.subjectotevřené zápustkové kovánícs
dc.subjectzpracovatelnostcs
dc.subjecttechnologické testovánícs
dc.subjectFEM simulacecs
dc.subject.translatedopen die forgingen
dc.subject.translatedworkabilityen
dc.subject.translatedtechnological testingen
dc.subject.translatedFEM simulationen
dc.titleOptimization of workability technological testing for open-die forgingen
dc.typekonferenční příspěvekcs
dc.typeconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen

Files

Original bundle
Showing 1 - 1 out of 1 results
No Thumbnail Available
Name:
Kotous.pdf
Size:
179.44 KB
Format:
Adobe Portable Document Format
Description:
Plný text
Download
License bundle
Showing 1 - 1 out of 1 results
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Proceedings PING 2019: modern trends in material engineering
Proceedings PING 2019: modern trends in material engineering