High-temperature corrosion behavior of selected thermally sprayed coatings in corrosive aggressive environment
dc.contributor.author | Česánek, Zdeněk | |
dc.contributor.author | Houdková Šimůnková, Šárka | |
dc.contributor.author | Lukáč, František | |
dc.date.accessioned | 2019-03-04T11:50:34Z | |
dc.date.available | 2019-03-04T11:50:34Z | |
dc.date.issued | 2019 | |
dc.description.abstract | Cílem článku je zhodnotit a porovnat korozní odolnost povlaku Hastelloy C-276 s povlakem Stellite 6 a Cr3C2-NiCr, deponovaných technologií HP/HVOF. Koroze byla testována pomocí směsi agresivních solí 40%Na2SO4-60% V2O5, simulujících prostředí spalovacích kotlů. Bylo realizováno 50 cyklů při teplotě 750°C a následné schlazení na pokojovou teplotu po dobu 20 min.Zkorodované vzorky byly testovány pomocí elektronového mikroskopu, a EDS analýz. V porovnání s Cr3C2-NiCr, povlaky Hastelloy a Stellite poskytly lepší ochranu. Korozní mechanismus Hastelloy C-276 je založen na tvorbě ochranné oxidické vrstvy, která brání dalšímu prnikání korozního média. Povlak Stellite 6 korodoval pohranicích jednotlivých splatů, což vedlo k jejich postupnému odloupávání. V případě povlaku Cr3C2-NiCr byla korozně napadena matrice, což vedlo k postupnému uvolňování karbidů a destrukci povlaku. | cs |
dc.description.abstract-translated | The aim of this paper is to evaluate and compare the corrosion resistance of Hastelloy C-276 coating with Stellite 6 and Cr3C2%-25% NiCr coatings. The coatings were deposited usingHP/HVOF(High Pressure/High Velocity Oxygen Fuel) thermal spraying technology. The corrosion test was conducted in the corrosive-aggressive environment of molten salts mixture in the composition of 40% Na2SO4–60%V2O5, simulating the corrosion environment of boilers for residual fuel oils. The corrosion test under cyclic conditions included 50 cycles at the temperature of 750 °Cand subsequent cooling at the room temperature for 20 min. The corroded specimens were analyzed using scanning electron microscope (SEM) and elemental analysis (EDS). In comparison with Cr3C2-25% NiCr coating, both Stellite 6 and Hastelloy C-276 coatings provided the substrate material with sufficient protection against high-temperature corrosion. The corrosion mechanism of Hastelloy C-276 coating was based on the formation of protective oxide layer which prevented further penetration of corrosive media. Stellite 6 coating exhibited the corrosion attack along splat boundaries resulting in spat delaminating into the build-up. The corrosion mechanism of Cr3C2-25% NiCr coating included the attack on NiCr matrix resulting in gradual separation of carbide phases into the corrosive environment. | en |
dc.format | 9 s. | cs |
dc.format.mimetype | application/pdf | |
dc.identifier.citation | ČESÁNEK, Z., HOUDKOVÁ ŠIMŮNKOVÁ, Š., LUKÁČ, F. High-temperature corrosion behavior of selected thermally sprayed coatings in corrosive aggressive environment. Materials Research Express, 2019, roč. 6, č. 1. ISSN 2053-1591. | en |
dc.identifier.document-number | 448882200003 | |
dc.identifier.doi | 10.1088/2053-1591/aae956 | |
dc.identifier.issn | 2053-1591 | |
dc.identifier.obd | 43924245 | |
dc.identifier.uri | 2-s2.0-85056095632 | |
dc.identifier.uri | http://hdl.handle.net/11025/31147 | |
dc.language.iso | en | en |
dc.project.ID | LO1402/CENTEM+ | cs |
dc.publisher | IOP Publishing | en |
dc.rights | Plný text není přístupný. | cs |
dc.rights | © IOP Publishing | en |
dc.rights.access | closedAccess | en |
dc.subject | tepelně rozstřikovaný povlak | cs |
dc.subject | odolnost proti korozi | cs |
dc.subject | roztavené soli | cs |
dc.subject | Cr3C2-25% NiCr | cs |
dc.subject | stellite 6 | cs |
dc.subject | hastelloy C-276 | cs |
dc.subject.translated | thermally sprayed coating | en |
dc.subject.translated | corrosion resistance | en |
dc.subject.translated | molten salts | en |
dc.subject.translated | Cr3C2-25% NiCr | en |
dc.subject.translated | stellite 6 | en |
dc.subject.translated | hastelloy C-276 | en |
dc.title | High-temperature corrosion behavior of selected thermally sprayed coatings in corrosive aggressive environment | en |
dc.title.alternative | Vysokoteplotní korozní chování vybraných žárově stříkaných povlaků v korozně agressivním prostředí | cs |
dc.type | článek | cs |
dc.type | article | en |
dc.type.status | Peer-reviewed | en |
dc.type.version | publishedVersion | en |