Effect of Temperature and Deformation on the Stability of Retained Austenite in Closed-die Forgings from High-strength Martensitic Manganese-silicon Steels
dc.contributor.author | Bublíková, Dagmar | |
dc.contributor.author | Jirková, Hana | |
dc.contributor.author | Stehlík, Adam | |
dc.contributor.author | Jeníček, Štěpán | |
dc.date.accessioned | 2023-10-30T11:00:19Z | |
dc.date.available | 2023-10-30T11:00:19Z | |
dc.date.issued | 2023 | |
dc.description.abstract | Zbytkový austenit je u moderních vysokopevných ocelí důležitou fází ve výsledné mikrostruktuře, která způsobuje kombinaci dobré pevnosti a tažnosti. Jedním z moderních postupů, kterým lze této kombinace dosáhnout, je Q-P proces (Quenching and Partitioning). Tímto postupem je možné dosáhnout pevnosti kolem 2000 MPa a tažnosti 10-15 %. Stabilitu zbytkového austenitu v martenzitické matrici ovlivňuje zejména chemické složení oceli, jeho morfologie, velikost a rozložení ve struktuře. Zápustkový výkovek byl vykován z experimetnální oceli s 0,42 % C, 2,45 % Mn, 2,09 % Si, 1,34 % Cr, 0,56 % Ni, který byl poté zpracován Q-P procesem. Na základě předchozích dat získaných z reálného procesu, byly na termomechanickém simulá-toru odzkoušeny dva modely tepelného zpracování, které se lišily rychlostí ochlazování. Po tepelném zpra-cování byla získána martenzitická struktura s obsahem zbytkového austenitu 13-17 %. Mez pevnosti se pohybovala v rozmezí 2100-2200 MPa s tažnostmi A5mm 8-15 %. Stabilita získaného austenitu byla testována při různých teplotních expozicích (200, 300, 400, -18, -196 °C) a po tváření za studena s různou rychlostí deformace (10-3, 10-1, 10 s-1). Podíl uhlíku v austenitu byl vypočítán na základě mřížkových parametrů zjištěných pomocí RTG difrakce. | cs |
dc.description.abstract-translated | In advanced steels, retained austenite is an important phase in the final microstructure, which provides a favoura-ble combination of strength and ductility. Advanced methods capable of achieving this include the Q-P process (Quenching and Partitioning). By this means, strength of around 2000 MPa and elongation of 10-15 % can be obtained. The main factors that determine whether retained austenite remains stable in the martensitic matrix include its morphology, particle size and distribution. A closed-die forging was made from an experimental steel containing 0.42 % C, 2.45 % Mn, 2.09 % Si, 1.34 % Cr and 0.56 % Ni and Q-P processed. Based on previous data measured in a real-world process, two basic heat treatment sequences were created and tested on a thermome-chanical simulator. The two sequences differed in the cooling rates. Upon heat treatment, a martensitic micro-structure with a retained austenite content of 13-17 % was obtained. The ultimate strength was in the range of 2100-2200 MPa with elongations A5mm 8-15 %. Austenite stability was tested by bringing the material to various temperatures (200, 300, 400, -18, -196 °C) and by cold forming at various strain rates (10-3, 10-1, 10 s-1). The volume fraction of carbon in austenite was calculated from the lattice parameters determined by X-ray diffraction | en |
dc.format | ||
dc.format | 7 s. | cs |
dc.format.mimetype | application/pdf | |
dc.identifier.citation | BUBLÍKOVÁ, D. JIRKOVÁ, H. STEHLÍK, A. JENÍČEK, Š. Effect of Temperature and Deformation on the Stability of Retained Austenite in Closed-die Forgings from High-strength Martensitic Manganese-silicon Steels. Manufacturing Technology, 2023, roč. 23, č. 3, s. 269-275. ISSN: 1213-2489 | cs |
dc.identifier.doi | 10.21062/mft.2023.030 | |
dc.identifier.issn | 1213-2489 | |
dc.identifier.obd | 43939829 | |
dc.identifier.uri | 2-s2.0-85165207815 | |
dc.identifier.uri | http://hdl.handle.net/11025/54563 | |
dc.language.iso | ||
dc.language.iso | en | en |
dc.project.ID | SGS-2021-025/Aplikace elektronového paprsku pro svařování moderních vysocepevných ocelí | cs |
dc.publisher | Jan-Evangelista-Purkyne-University | en |
dc.relation.ispartofseries | Manufacturing Technology | en |
dc.rights | © Manufacturing Technology | en |
dc.rights.access | openAccess | en |
dc.subject | Q-P process | cs |
dc.subject | zbytkový austenit | cs |
dc.subject | AHSS oceli | cs |
dc.subject | RTG difrakce | cs |
dc.subject | termomechanický simulátor | cs |
dc.subject.translated | Q-P process | en |
dc.subject.translated | retained austenite | en |
dc.subject.translated | AHSS steels | en |
dc.subject.translated | X-ray diffraction | en |
dc.subject.translated | thermomechanical simulator | en |
dc.title | Effect of Temperature and Deformation on the Stability of Retained Austenite in Closed-die Forgings from High-strength Martensitic Manganese-silicon Steels | en |
dc.title.alternative | Vliv teploty a deformace na stabilitu zbytkového austenitu u zápustkových výkovků z vysokopevných martenzitických ocelí legovaných manganem a křemíkem | cs |
dc.type | článek | cs |
dc.type | article | en |
dc.type.status | ||
dc.type.status | Peer-reviewed | en |
dc.type.version | publishedVersion | en |
Files
Original bundle
1 - 1 out of 1 results
No Thumbnail Available
- Name:
- Mft_002028_fin-0001.pdf
- Size:
- 10 MB
- Format:
- Adobe Portable Document Format